![]() ![]() ![]() Odds are you'll just have to take it back. You will not know what kind of stem you need prior to taking the faucet apart, so do not buy it in advance. Bring this part to your local hardware or plumbing supply store to buy a replacement. Using a valve stem wrench or channel locks, remove the stem. There may also be some hexagonal parts that you will have to use a wrench to take care of. In a newer simple system, there is usually only the collar, but older faucets, especially bathtub faucets, may have a knurled fitting that can be removed with a channel lock. Depending on the type of faucet you are working on and how old it is, there may be several other parts to remove before the collar and stem can come off. Remove the collar from around the stem as well. Slide the decorative handle off of the stem and set it aside. Take the appropriate style screw driver and turn the screw counterclockwise to remove it. Depending on the type you have, you may find there are more parts to be removed than expected. It is a good idea to list on paper the order in which you remove parts so it's easier to reassemble the faucet later. This will be covering a screw that secures the handle in place, so when you see it, pry it off with a flathead screwdriver if you're unsuccessful, try a channel lock pliers instead. Then, look at the handle on the faucet, and check for a cap in the center. This will save money in the long run.Īnderson Plumbing, Heating & Air offers plumbing and HVAC services to customers in San Marcos, San Diego, Vista, Escondido, and throughout San Diego County.Once the water pipes are empty, cover the drain in the sink with a rag or other item to keep small parts from accidentally falling into it. Next time you see these problems start before your shower valve goes really bad, do preventive maintenance. If the valve is installed properly but you still see water coming from both the shower head and the tub faucet, you may need to contact your plumber for a diverter replacement. If it becomes excessive, check for this error first. Some water coming out of the spout is normal. So, when the shower is on and the water is coming out of the shower head you also see water coming out of the spout. Badly Installed Shower Valvesīelieve it or not, your shower valve can be installed upside down. So, you will have to hunt for that part so you will not have to spend money to replace the whole thing. Sometimes the shower valve seems bad but the plastic knob is cracked instead. (Indicated by leaking or seeping water.) The rubber rings and parts around the shower valve may need to be replaced, as these shower components are susceptible to breaking, corrosion, or dry-rot. If the cartridge wears out, your shower valve won’t function properly. Shower handle gets stuck or “slips” and doesn’t turn on the water.Difficulty turning the shower handle, which worsens over time.Dripping or running water when you turn your shower off (most common).There are a few ways to tell if your shower cartridge has gone bad: This type of shower uses holes to regulate the flow of water from your faucet or shower head. How to tell if your shower cartridge is bad:Ĭartridges are one of several common types of faucets and are particularly common in showers. It seems the water just suddenly stopped. When you use the handle to turn on the shower, does it grind? Does it not turn at all? What about the hot water? Is the water trickling and not coming out? Or is it not mixing hot and cold together correctly? Maybe you are not getting any hot water or no water at all. How to Determine if Your Shower Valve is Bad ![]()
0 Comments
Leave a Reply. |